915 Generation Digital Wattmeter Signal RF Power Meter Detector -60 to -5DB

1 Measuring power range -60~-5dBm (external RF attenuator can be extended to 100dBm)
2 Measurement power resolution 0.1dBm
3 Measurement frequency range 1~8000MHz
4 output interface SMA_K
5 Working voltage 6~12VDC 6 Working current less than 70mA (backlight on)
7 Working temperature -40 Celsius~65 Celsius
8 Storage temperature -40 Celsius~65 Celsius
9 size 57 x 58 x 14mm length X width X height
(1) interface
1.RFPowerMeter
2. NWDZVer2.0
(2) Main display interface
1.Freq: XXXX.XXXXMHz set frequency (can be changed)
2.P:±.XdBmAT:XXdB
Measured power (cannot be changed) Power attenuation (can be changed)
(3) Enter the main (MeasuSetup) (press "ENTER" to enter)
Freq frequency setting (1-8000MHz)
ATTe attenuation setting (0-99) power compensation (range ±10) ±3dBm
(It is when it flashes, press the button to move the cursor to select it, and press the "ENTER" button to enter the submenu)
AEnter the Freq setting interface (freqSetMenu)
XXXX.XXXXMHz frequency setting
(Press the button to move the cursor to select, press "+/-" to adjust, press the "ENTER" button to confirm, exit and return
Main interface)
BEnter the ATTe setting interface (AttemuationMenu)
ATTN:XXdB attenuation setting
(Press the button to move the cursor to select, press "+/-" to adjust, press the "ENTER" button to confirm, exit and return
Main interface)
CEnter the setting interface
(offsetSetMenu)
Colour:green
Material:PCB Package Contents:
1 * Signal Strength Module Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.