915 Generation DC 12V 8CH Analog Digital Input Output Devices (Only PCB Boa

Working voltage: DC 12 (DC 12-25V recommended power supply with small ripple)
Working current: 14-34MA (Related to the output current)
MODBUS RTU instruction support 03 06 function code
3 analog input channels, 1 switch input channel: Vi1 is 0-5V voltage input, Vi2 is 0-10V voltage input, Ii is 0-20MA current input; DiP DiN is switch input port (NPN/ Photoelectric isolation input)
3 analog output channels, 1 switch output channel: Vo1 is 0.05-5V voltage output (Less than 20MA), Vo2 is 0.1-10V voltage output (Less than 20MA), Io is 0.5-20MA current output; is Switch output port (maximum drive current 500MA, can directly drive relays and solenoid valves) Voltage resolution is 0.01V, measurement accuracy is 1%; Current resolution is 0.01MA, measurement accuracy is 1%; if the error is 1%, it can be calibrated MODBUS commands can be made serial HyperTerminal (serial assistant) OR PLC Enter; Under the MODBUS mode, it can support up to 247 devices in parallel
Width: suitable for PCB board width UM72(72mm)
Backplane length: suitable for 60 mm PCB boards
Product model: UM72 Insulation grade: -retardant VO grade
Installation: DIN35 and C45 rail
Note:
1 Channel 1 (Vo1) output voltage range is 0.05V-5V, channel 2 (Vo2) output voltage range is 0.1V-10V, channel 3 (Io) output current range is 0.5-20MA 2 At the moment of power-on, the current and voltage output ports have 10-20MS high pulses 3 DiP DiN is a passive switch input port (see the for wiring) 4 is a passive switch output port (see the for wiring)
Types:A-Only PCB Board
Colour:Green
Material:Plastics
Size:A-60 x 72 x 18mm
Weight: A-33g Package Contents:
1 x Analog Digital IO Module Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.