915 Generation Car LED Daytime Running Lights Controller Relay Harness Dimm

and high quality,Mini shape,light weight and waterproof
Fit for of , Time-lapse power off function
Constant light + dimming + delay + automatic switch
Simple installation,with no need to change any electric line
Intelligent up: When the car is started (the voltage must be higher than 13V+), the daytime running light is automatically turned on. When the headlights (or reading lights) are turned on, the daytime running lights are dimmed (darkened), when the car is turned off (the voltage must be lower than 12.5V) , the daytime running light is off after 15 seconds! Name:Daytime Running Lights Controller
Item Type: Day Light
Interface Type: None
For Vehicle /Model: Universal
Item : DRL Controller
Wattage: DRL Controller
Voltage: 12-18V
Working current: 3A
Time-Lapse Power Off: 15s
Note:
After the battery is connected, the daytime running light will turn on for about 15 seconds and then turn off the light. This is a normal phenomenon (realizing the delay function). After that, you need to the car. When the voltage reaches 13V+, it will working!
The of :
1. The starting voltage is 13V+, and the flameout voltage is lower than 12.5V (if it is higher than this value, it will be extended for a few minutes until the voltage .)
2. 1 pair of daytime running lights power does not 18W (most of the daily running lights will not the power)
Wiring Instruction:
1. First connect the and negative side of the daytime running lights on the left and right sides, and connect the negative poles first.
Colour:As shown
Material:plastic Package Contents:
1 * Daytime Running Lights Controller Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.