915 Generation CA-255S 10-48 Inch LED LCD TV Backlight Constant Current

Detailed Information About The Product:

10-42 inch LED Backlight Lamp Driver Board Constant current board
BOOST structure
Conversion efficiency reached more than 92%
low heat of the Device, stability,have a longer service life
the PCB is small,Slim design,Current control error within ± 5%

You can use the 12V power supply to reduce the system cost!
This product is constant current board, voltage is automatically adapted
The temperature rise is controlled at about 25degrees (Temperature rise = device surface temperature - ambient temperature)
Limit parameters:
When to 24V input: Vout = 75V Vout = 720mA maximum or 60W
When to 12V input: Vout = 75V Iout = 400mA maximum or 30W
1. VCC: The positive of voltage supply, Circuit supply voltage (voltage is usually 12V or 24V)
2. ON/OFF,ON,EN,ON_BL: Switch signal pin
3. PWM,PDIM,VDAJ,BL-PWM: Brightness adjusting pin
4. GND: Ground (negative electrode)
5. LED+: the positive electrode of Light emitting diode (lamp)
6. LED-: the negative electrode of Light emitting diode (lamp)
Colour:As shown
Material:PC+Metal

Package Contents:
5 x LED LCD TV Backlight Constant Current Board

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any