[Weight] Net weight 1.225KG
[Size] The length of the shelf surface is 55CM, the width is 14.5CM, and the supporting feet can be adjusted to a height of about 35-45CM.
[Material system] High-strength all-aluminum alloy
[Suitable Models] 24inch-29inch bicycles with a seat post diameter below 33MM, suitable models include Oyano, ATX, XTC and other series, and many mainstream mountain bikes such as Warrior and Duke series can be installed. The diameter of most seat tubes of DAHON bicycles is greater than 35MM, and the tubes of models such as SP8 are too thick to be installed.
[Accessories] 6 screws, 6 nuts, 6 fillers, 4 small washers, 4 large washers.
Frequently Asked Questions:
1. Why can't the screw be screwed in when it is turned halfway?
Answer: Because it is a non-slip nut with a rubber ring inside, it will not turn when half-twist, but as long as it is turned hard, it will be enough to pierce the rubber ring. This kind of screw is not easy to slip out after it is installed. Very safe.
2. How much can this shelf carry?
This shelf 671-09 and the store's 620-09 are relatively strong and have a relatively large load among the quick-release shelves currently on the market. High Load Capacity (25kg)
Colour:Black
Material:alloy
Size:55x14cm
Package Contents:
1 * bike rear rack
6 * screw
6 * Nut
6 * Filler
4 * Small spacers
4 * big spacers
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.