915 Generation 4Pcs W1209 12V DC Digital Temperature 50110°C Electronic Temperature Control Module Switch with 10A OneChannel Relay

Product Description
Instructions for use Connect the power supply and equipment the measuring temperature is displayed
Press the SET on press or - to set the temperature long press or - to quickly increase or decrease
Press SET to confirm the setting and return controller automatically performs the relay ON or OFF
The thermostat output is 10A relay meet a of high-power loads LED Indicator LED off indicates the relay off Lighting indicates the relay is closed

Material MetalABS
Color as shown
Digital LED tubes LL indicates sensor open indicates overrange the relay will be forcibly disconnected --- indicates high temperature alarm
Long press the SET on to enter the main
Press or - to switching between P0-P6
Then long press SET or 10 seconds without keystrokes to confirm the setting and return
Specifications
Model W1209 with case
Dimensions 485 x 40 mm
Temperature control mode ON or OFF
Temperature range -50 - 110 degree centigrade
Resolution when temperature is 01 degree the resolution is -99 - 999 other temperature segment is 1 degree
Control accuracy 01 degree
Hysteresis accuracy 01 degree
Refresh rate 05 s
High temperature protection 0 - 110 degree centigrade
Supply voltage DC 12V
Static current less than 35MA attract current less than 65MA
Output voltage DC 12V
Output power 20A relay
Measurement input NTC 10K 05 percent waterproof sensor
Requirements -10 - 60 degree centigrade humidity 20 - 85 percent

Package Contents
4 x W1209 12V DC digital temperature controller boards with case

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm