This charger For m2; Brand new and high quality Super strong protection.
Lnput: 100-240VAC, 50 / 60Hz; Output: 42V 3A; Charging Indicator: Charge red light is full of green light; Safety protection: OVP / OCP / Overload protection / Short-circuit protection; Max power: 150W; Connector: 3P GX16, and negative (1 +, 3-), diameter of 12.44
Purchase Notes: make if your battery model matches the charger, and make that the and negative poles of the connector are the same as your charger. If the and negative poles are different, the charger will always display a green light and fail to charge.
If you are using a multimeter to test the charger, fully charge the multimeter for testing. There will be errors when the multimeter is not fully . Charger Use and Maintenance:
1. When charging, connector to the battery, then connect to the AC; After full, cut off AC, then unplug the battery. If you pull the battery plug first when charging, especially when the charging current is (red light), it is easy to damage the charger.
2. When the LED light turns green, keep charging for 2-3 hours.
3. do not run out of battery power, then the charger. Otherwise, the battery cannot be or even damaged.
4. Long-term superficial battery discharge, about 3 months, for a deep discharge, It is the so-called re-illumination, which is favorable for the long-term motionless activation material in the deep part of the battery. means driving the controller battery action undervoltage protection.
5. use the charger in a dry place in time.
6. When you do not use the charger, do not always connect the power supply.
7. confirm the battery, Because it is used to charge the thium battery. 't use the charger on the LiFepo4 battery, otherwise the charger will incredibly hot.
Plug Type: EU Plug, it applies to Indonesia, , , , and so on.
Colour: black
Material: PC+ABS Package Contents:
1 * Lithium battery charger (12mm three-core aviation head iron head)
1 * EU Plug Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.