915 Generation 3PCS 150W DC-DC Boost Converter Power Supply Module

of application: DIY an output adjustable car power supply, you only need to connect your 12V power supply to the input, you can freely and continuously adjust the output voltage (14-35V), the output voltage cannot be lower than the input voltage.
Car notebook power supply. The input is connected to your 12V power supply, and the output is adjusted to the voltage of your notebook to work. Boost charger, you can use 12V power supply to charge batteries higher than 12V, such as 24V batteries.
To supply power to your electronic equipment, as long as the voltage is adjusted to the voltage you need and the current does not the rated current, it can work normally.
The power supply of the front of the system, when you are working on a project and the input is 10-18V, and your system board needs about 24V power supply and power is , the power of ordinary DC-DC modules is too small , you can work directly on the machine without debugging, and easily achieve high-power boost.
Disclaimer: The output power of this module is affected by various factors such as the - power supply and post- load in addition to the load capacity of the module itself; the following data are the results measured by professional equipment, and other factors are not considered. The power module is a kind of electronic components, purchase it carefully if you do not have electronic professional . Module : non-isolated boost module
Module size: length 65MM x height 23MM (width 56.5MM including heat sink)
Input mode: IN+ input level, IN- input negative
Output mode: OUT+ output level, OUT- output negative
Wiring : no soldering, terminal
Input voltage: 10-32V
Output voltage: (1) Continuously adjustable (12-35V) The default delivery voltage of is 19V
(2) Fixed output (optional between 12-35V), tell the shopkeeper when purchasing.
Output current: 6A(MAX)
Input current: 10A (MAX) ( strengthen heat dissipation if it exceeds 10A)
Output power: natural cooling 100W (MAX), plus fan 150W (MAX)
Easily 65W 90W laptop including dual cores
Using a 12V battery with a normal 19V 3.42A laptop, the module temperature is about 45 degrees
Conversion efficiency: 94% (measured when inputting 16V and outputting 19V 2.) (for reference only)
Working temperature: industrial grade (-40℃ to +85℃) (if the temperature exceeds 40℃, reduce the power to use, or a fan)
Full load temperature rise: 45℃
No-load current: typical 25mA
Short circuit protection: none ( an overcurrent protector to the input)
Input reverse polarity protection: none, two tubes are connected in series at the input
Colour: red
Material: PCB, metal Package Contents:
3 * 150W DC-DC Boost Converter Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.