915 Generation 2Pcs 1M PTFE Tube 1Pcs Pipe Cutter 4Pcs Pneumatic 3D Printer

corrosion resistance - to withstand the effects of all strong acids (including aqua ), strong oxidants, reducing agents and various solvents other than molten metal, fluorinated media and above 300 ° C The.
Strong resistance to insulation -not affected by the environment and frequency, volume resistance up to 1018 ohms, dielectric loss is small, wear high voltage. resistance to high and low temperature - the impact of little change in temperature, temperature range, can use the temperature -190 ° and +260 °.
Unique -lubricating - with the smallest friction coefficient in plastic, is the ideal oil-free material. Protruding surface non- - known solid materials can not adhere to the surface, is a surface of the smallest solid material. resistance to atmospheric aging - radiation resistance and low permeability - long-term exposure to the atmosphere, the surface and performance remain unchanged.
Valuable nonflammable - limited oxygen 90. Polytetrafluoroethylene - selectedpolymerized polytetrafluoroethylene resin paste by the paste from the processing, the appearance of pure white. High temperature and low temperature - the use of temperature -190 ° C ~ +280 ° can be autoclaved.
Corrosion-resistant - water hydrofluoric acid and a of solvents, and no dissolution of adsorption and precipitation phenomenon. Environmental pollution - metal blank value of low lead uranium content of less than 0.01PPB does not adhere to any material, non-toxic. Material: PTFE+plastic+metal
colour:As shown Package Contents:
1 x 1 meter blue PTFE tube
1 x 1 meter white PTFE tube
1 x pipe cutter
2 x PC4-6mm white cap pneumatic connector
2 x PC4-10mm white cap pneumatic connector Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.