This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeElectronicsAccessories & SuppliesCamera AccessoriesBatteries, Chargers & AdaptersChargers18650 Lifepo4 Lithium Battery Protection Board
/product/88/1835372/1.jpg?4128)
/product/88/1835372/2.jpg?4128)
/product/88/1835372/3.jpg?4128)
/product/88/1835372/4.jpg?4128)
/product/88/1835372/5.jpg?4128)
Share this product
GH₵ 127.49
GH₵ 161.0521%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 18.44 to Tema
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 18.44
Ready for pickup between 12 December & 17 December when you order within next 5hrs 5mins
Door Delivery
Delivery Fees GH₵ 32.72
Ready for delivery between 12 December & 17 December when you order within next 5hrs 5mins
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
betanyr
80%Seller Score
3 Followers
Seller Performance
Shipping speed: Average
Quality Score: Excellent
Customer Rating: Good
Product details
1.4 series 16.8V 40A lithium battery protection board (with own function - AUTO );
2. Integrate 10 low internal resistance MOS tubes, continuous discharge 40A, 100mA balanced current, suitable for electric drills, sprayers, LED lights, low-power inverters;
3. of application: suitable for nominal voltage 3.6, 3.7V (including 18650, 26650, polymer lithium battery), 4.2V lithium battery with full voltage
4. Suitable for electric drills with starting current 80A and power 230W, with balanced charging function
5. The high current heating is reduced by 30%, and the anti-interference function is increased Conditions for successfully starting the electric brick:
1, 4 15C-20C power batteries or 810C-15C power batteries (ordinary 18650 power drills are required!!
2. The connection line between the battery pack and the protection board should be as short as possible and as thick as possible;
3. When welding the battery for the first time, do not need any load or any equipment at the output end.
4. If it still can' , contact the shop king again to tell you the solution.
Precautions:
1: 4 10C-20C power batteries, or 8 5C-10C power batteries are required to successfully the electric drill (recommended power battery models: VTC4, VTC4A, VTC5A, VTC6) 0V and 12.6V connecting cables, use 3 square mm above copper wire ( sheet cannot be used!!)
2: Strictly connect 0V, 4.2V, 8.4V, 12.6V, 16.8V according to the , and do not touch any components on the board when soldering the wires, and do not intentionally short-circuit.
3: When the battery is welded for the first time or is being , as long as a single battery exceeds the 4.2V430 resistance, it will heat up and discharge (discharge to about 4.19V and stop heating). If the 430 resistor is seriously hot (' dare to touch it when it is too hot), check whether the wiring is wrong
Product weight: 10.3g
Colour:green
Material: PCB
Size:45 x 60 x 3.4mm Package Contents:
1 x 4 string equalizer board Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
2. Integrate 10 low internal resistance MOS tubes, continuous discharge 40A, 100mA balanced current, suitable for electric drills, sprayers, LED lights, low-power inverters;
3. of application: suitable for nominal voltage 3.6, 3.7V (including 18650, 26650, polymer lithium battery), 4.2V lithium battery with full voltage
4. Suitable for electric drills with starting current 80A and power 230W, with balanced charging function
5. The high current heating is reduced by 30%, and the anti-interference function is increased Conditions for successfully starting the electric brick:
1, 4 15C-20C power batteries or 810C-15C power batteries (ordinary 18650 power drills are required!!
2. The connection line between the battery pack and the protection board should be as short as possible and as thick as possible;
3. When welding the battery for the first time, do not need any load or any equipment at the output end.
4. If it still can' , contact the shop king again to tell you the solution.
Precautions:
1: 4 10C-20C power batteries, or 8 5C-10C power batteries are required to successfully the electric drill (recommended power battery models: VTC4, VTC4A, VTC5A, VTC6) 0V and 12.6V connecting cables, use 3 square mm above copper wire ( sheet cannot be used!!)
2: Strictly connect 0V, 4.2V, 8.4V, 12.6V, 16.8V according to the , and do not touch any components on the board when soldering the wires, and do not intentionally short-circuit.
3: When the battery is welded for the first time or is being , as long as a single battery exceeds the 4.2V430 resistance, it will heat up and discharge (discharge to about 4.19V and stop heating). If the 430 resistor is seriously hot (' dare to touch it when it is too hot), check whether the wiring is wrong
Product weight: 10.3g
Colour:green
Material: PCB
Size:45 x 60 x 3.4mm Package Contents:
1 x 4 string equalizer board Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
- Durable and good quality
- Active Equalizer Equalizer
- Lithium Equalizer Balancer
- 26650 equalizer equalizer
- battery protection board
- Energy Transmission Board
- The details are as described above
What’s in the box
1 x 4 string equalizer board
Specifications
- SKU: 91954EA4RKRU9NAFAMZ
- Model: Balance board
- Production Country: China
- Size (L x W x H cm): 7x5x1
- Weight (kg): 0.013
- Main Material: PCB
Verified Customer Feedback
This product has no ratings yet.
/product/88/1835372/1.jpg?4128)
915 Generation 18650 Lifepo4 Lithium Battery Protection Board
GH₵ 127.49
GH₵ 161.0521%
Questions about this product?
