915 Generation 12V TEC1-12706 Semiconductor Refrigeration Thermoelectric Eq

1. The substrate uses superconducting aluminum as the substrate, which breaks the conventional mode of using alumina ceramic substrates. It is helpful for welding during the installation process, so that it can be in contact with the radiator and cooler at zero distance.
2. The device uses innovative zinc telluride as raw material, which perfectly replaces the mainstream of bismuth telluride as raw material with material of merit. This increases the overall temperature difference of the device by 3.5℃, and the cooling rate is higher than the original device. 10S shortened
3. The thickness of the device is 5.7mm, and the thickness of device is usually between 3-4mm. The size of the PN junction unit of the device is changed from the original 1.4x1.4x1.5mm to 1.4x1.4x2mm, which helps to increase the cooling effect. The distance between the hot-terminal reduces the influence of the heat release of the hot end on the cooling of the cold side
4. The service life is over 40WH, and the device has undergone the following rigorous tests to make the storm more violent: Polarity switching test: This test mainly investigates the influence of thermal stress on the life of the refrigerator.
5. Test : 20℃~80℃, 5 minutes of forward current and 5 minutes of reverse current is a . High temperature storage test: This test mainly investigates the influence of the diffusion of harmful on the life of the refrigerator. Test : The company now conducts two high-temperature storage tests at 90℃ and 150℃. Low temperature storage test: This test mainly investigates the low temperature characteristics of various materials in the refrigerator.
Test : The company is now conducting -40 ℃ low temperature storage test.
Temperature shock test: This test mainly investigates the influence of thermal stress on the life of the refrigerator.
Test : 70℃ (30 min) / -55℃ (30 min), conversion time 1 min, 5 cycles
Impact test: This test mainly examines the of the refrigerator to withstand external impact.
Wire specifications: lead length 150 +/- 5mm, RV standard wire, single end 5mm tinned
Internal resistance: 2.0~2.2 ohm ( temperature 23 +/- 1℃, 1kHZ Ac test)
Maximum temperature difference: △Tmax(Qc:0) above 66℃.
Working current: 6A
Rated voltage: DC12V (Vmax: 15.4V)
Cooling power: Qcmax 60W
Assembly pressure: 85N/square centimeter
Working environment: temperature range -55℃~83℃ (excessive temperature will directly affect cooling efficiency)
Encapsulation process: standard 704 silicone rubber seal around
Storage conditions: -40~60℃
Single weight: 23g
colour: black
Material: ABS
Size: 40x40x5.7mm Package Contents:
1 x Cooling sheet Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.