8 Pcs Food Grade 100 Holes Size 0 Capsule Filling Machine W/Block Board

Name:capsule filling board
Model:555695
Specifications
:blue+orange
Materials:acrylic
Holes:100

Features
-The use of food-grade environmental protection material, non-toxic odorless.
-The edges and capsules are smooth and rounded.
-Body plate four corners of the spring hole for the injection of one, highly accurate.
-The cap plate is made as a whole piece, easy to clean, firm and easy to .
-Arrange the disk frame and bottom plate as a whole, strong and beautiful does not .
-Compressed board nail and handle for the same material, clean and fresh, nail and floor as a whole.

Instructions
-Place the alignment tray on the body plate with the holes aligned. Put the right amount of capsule body (long capsules called capsules, short capsules caps) into the box, from the body plate and the arrangement tray before / after a little slanting screen (note the hand to block the plate arrangement, The will fall out), the capsule will fall into the body capsule capsules one by one. Remove excess capsules from the notches and remove the alignment disc. (If some capsules fall into the , the body plate upper hand down a little, exposing the capsule body, the can be transferred out of tune.)
-Use the same method as above to cap the caps onto the cap plate and set aside for use. (Hint: Do not put too many capsules into the capsules until they are more than twice as heavy as they will fall into the cap holes.)
-The amount of will be poured in the body of a good capsule capsule, scraping with a scraping board back and forth, filled with after the plate will be compacted, and then the second filling. Capsules filled with , scraping the excess , will place the board scattered scraping aside, keep the console clean.
-The notched face on both sides of the middle plate was faced upward, and the cap plate was closed so that the mouth portion of the cap was inserted into the hole of the middle plate. Will overlap with the two plates over the buckle in the body of the board alignment, light or gently rotate the hands before and after the (if the alignment on the direct , there may be caps caps body does not match, there will be Damage, micro-shift under , if there is not a hat body anastomosis, will feel something to block the does not go down), when the whole board cap and body are pre-locked state of anastomosis, and then forced the palms in the end, in every place a few , then the capsule has been completely locked.
-Remove the cap plate, put the middle plate, then fill the capsules are in the middle plate. Pour the finished product into a prepared clean container or bag.

Package Included
1 x block board
1 x arrange the plates
1 x body plate
1 x cap plate
1 x middle plate
1 x board
1 x scraping board
1 x plate handle







a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a