6Pcs 1246 Prong DIY Diamond Lacing Stitching Chisel Set

Detailed Information About The Product:

Name：6Pcs 1/2/4/6 Prong DIY Diamond Lacing Stitching Chisel Set Leather Edge Skiving DIY Craft Tool, Industrial Grade White Steels Leather Craft Kits - Rugged Durable (4mm)
WHAT YOUR GET6pcs in total, 4pcs x 4mm 1/2/4/6 Leather Hole Punch, 2pcs x V & U Shaped Groover, Can meet different DIY needs at the same time.
PREMIUM MATERIAL Made of 100% industrial grade high strength stainless steels, is durable and useful leather craft tool.
SUPERB PRODUCTION TECHNOLOGY The overall heat treatment, integrated molding, high hardness. Hand polished durable, keen-edged rhombus tooth is helpful to punch quickly and effortlessly.
USAGE 4mm 1/2/4/6 prong: Convenient to punch effortlessly and quickly. It is better to use the tool with soft pad to protect keen-edged chise teeth. Leather grooving: The middle groove is sharper than both sides, and can easily chip off the edge of leather; It is recommended to use 30 to 45 degrees angle, making it easier to work. WARM PROMPT Each product surfaces are coated with a rust preventive oil before shipping; Please wipe clean before use.
Color: Silver. Material: white steel + stainless steel
Precautions for Use:
The industrial grade stainless steel prong is consumable; it is like a blade, scissors are used for a long time will be slow, The customers must pay attention to the following points when using:
1.To prevent the interrupt prong tooth. When you punch it, it must be perpendicular to the epidermis.
2.When using the leather hammer to beat Prong, pay attention to the strength of your hands, first light and back heavy.
3.Please be sure to cooperate with the soft pad, which is excellent protection for the cutting teeth and gasket when the punching for either.
4.You can use oil or oil for white steel prong for protection and maintenance when you don't use White Steel Prong.
Each product surfaces are coated with a rust preventive oil before shipping; Please wipe clean before use.
Suggested Use
1.The 1 prong is mainly used for bending of the leather rightangles, or to use when it is perforated on leather alone to use.
2.The 2 prong is usually used for bending of leather curves or for making leather of small pieces.
3.The 4 prong is used for the straight line drill of the leather. It is widely used.
4.The 6 prong can be used in playing a straight line; it can hit six holes and is efficient.
5.The U V shaped stitching groover suitable for leather edge skiving and burnishing carving the leather craft edge.
Package Contents:
4* Leather Hole Punch
2* V U Shaped Groover
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.