433MHZ Universal 4 Channel Wireless RF Remote Control Duplicator Copy Electric Gate Garage Door Key Swit More

Description:
Support the copy of the rolling code and fixed code, support for more brands can be applied to copy more kinds of remote control.

Compatible:
2260 (all manufacturers)
2262 (all manufacturers)
Pt2264, 5326 (all manufacturers)
Sc5262, ht600, ht680, ht6207, ht6010, ht6012
Ht6014, smc918 series, 527 (all manufacturers)
1527 (all manufacturers)
2240 (all manufacturers)
Some 433mhz compatible brands (bearing code):
For bft mitto2 mitto4 (old version)
For Bebinca in WV
For doorman tx4
For good floors
For v2
For novoferm
For facial xt4 433rc
For TXB-42R key
For data ptx4
For god au1600
For nice-smilo
For Rossi
For motorline mx4sp dsm
For dea mio tr2
For Piccinini tx3c
For centurion nova
For an EM-4 engine
For fading jubi
For Hiland

Specification:
Model Number: 433MHz
Wireless Communication: RF
Chipset compatibility: all fixed code and learning code
Feature 1: Remote Control Duplicator
Feature 2: Electric Gate Garage Door Key
Feature 3: Universal Gate Remote Control
Feature 4: Cloning Duplicator Key
Features 5: Wireless Rolling Code

Reproduction Method:
Here is the way to copy
Memory clearance
1. Press buttons 1 and 2 simultaneously until the LED flashes 3 times
2. Release button 2 (Keep pressing button 1), and press button 2 slowly for 3 times, LED flashes quickly.
3. Release both buttons, the duplicator is ready for copying
Duplicating: Put the duplicator aside from the original transmitter, as close as possible.

Fixed code remote control:
Press and hold button 1 of the original transmitter, then press and hold button 1 of the duplicator until you see the duplicator’s
LED flashes mean the duplicating succeeds.
Repeat the above step for the rest buttons. The duplicator will work after duplicating.

Rolling code remote control:
Press and hold button 1 of the original transmitter, then press and hold button 1 of the duplicator until you see the duplicator’s
LED flashes mean the duplicating succeeds.
Once 1 button is duplicated, the rest buttons will generate automatically, please follow the original receiver manual to insert
the new duplicator on the receiver.
If you erase the code by mistake, you can resume it by pressing and holding both of the "3" and "4" buttons on the remote
controllers at the same time, after 10 seconds, the LED flashes 2 times and turns off which indicates the code of the copy
the remote controller is resumed.

Remarks:
For fixed code &learning code remote controls, the duplicator will work after duplicating.
But for the rolling code brand listed above, please follow the original manual to program the duplicator to the receiver after duplicating.

Package includes:
1* 433MHZ Remote control
1* Manual