This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeTools & Home ImprovementElectricalHome Automation Devices433 MHz Universal Wireless Remote Control Switch DC 12V 4 Gang RF Relay Receiver and Transmitter for Garage/LED/Home DIY Control
/product/43/3017552/1.jpg?4123)
Share this product
Shipped from abroad
433 MHz Universal Wireless Remote Control Switch DC 12V 4 Gang RF Relay Receiver and Transmitter for Garage/LED/Home DIY Control
GH₵ 578.00
GH₵ 809.2029%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 57.12 to Tema
0 out of 5
(No ratings available)Variation available
2offers starting fromGH₵ 578.00
See More OffersPromotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 57.12
Ready for pickup between 05 December & 11 December when you order within next 21hrs 10mins
Door Delivery
Delivery Fees GH₵ 69.02
Ready for delivery between 05 December & 11 December when you order within next 21hrs 10mins
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
Souchaci
60%Seller Score
Be the first to follow
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Compare Offers
GH₵ 582.12
Sold by: Live a good and healthy life | Seller Score: 90%
Product details
433 MHz Universal Wireless Remote Control Switch DC 12V 4 Gang RF Relay Receiver and Transmitter for Garage/LED/Home DIY Control
- I am an international seller，100% brand new and of high quality
433 MHz Universal Wireless Remote Control Switch DC 12V 4 Gang RF Relay Receiver and Transmitter for Garage/LED/Home DIY Control
Technical Data:1. Working Voltage:DC12V
2. Quiescent Current:5mA
3. Working Frequency:433Mhz
4. Receiving Sensitivity:-104dBm
5. Function option:Momentary/Toggle/Latched
6. Modulation Mode:ASK
7. Matching Mode: Intelligent Learning e
8. Output Mode:Dry contact /Voltage output
9. Shell:Yes
10. Working temperature : -30~+80
11. PCB dimension :73x53(mm).
+V — Positive pole input
GND — Negative pole input
1 —KC1 Normal Closed of relay (NC)
2 —KC1 Common of relay (COM)
3 —KC1 Normal Open of relay (NO)
4 —KC3 Normal Closed of relay (NC)
5 —KC3 Common of relay (COM)
6 —KC3 Normal Open of relay (NO)
7 —KC2 Normal Closed of relay (NC)
8 —KC2 Common of relay (COM)
9 —KC2 Normal Open of relay (NO)
10 —KC4 Normal Closed of relay (NC)
11 —KC4 Common of relay (COM)
12 —KC4 Normal Open of relay (NO)
When the relay is energized, NO and COM connected.
Specifications Of The Remote Control: Operating frequency: 433.92MHz
Power by 3V Coin Cell Button Battery (Battery included ),
Material: PVC.
Button: 4 buttons
Size: 55mm x 30mm
Operating voltage: 3V
Operating Current: 12mA
Transmitting power: 10mw
Modulation mode: ASK (AM).
Ening type: Learning.
Transfers distance: 80m.
APPLICATION
Notice: Different options include different packages:
Package 1 Included: Only 1 EV1527 Learning e Remote Control * 1pcs ;
Package 2 Included: (Only 1 receiver) Receiver module (KR1204 ) *1pcs ( include Shell );
Package 3 Included:1 * Receiver module (KR1204) ( include Shell ),
1 * Remote Control (include battery ).
Free Gift: Cross screwdriver * 1pcs.
Attention Please:Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
About Working mode:
1. Momentary/Jog: Press and hold->on; Release->OffKeep pressing one button , the corresponding channel is working /on;
Loosen your finger is stop/OFF .
(4 channel switch(receiver) need 4 button remote control (transmitter ))
2. Toggle/Self-Lock: Press->on; Press again->OffPress one button for one time , the corresponding channel is working/on;
Press the same button again is stop/OFF .
(4 channel switch(receiver) need 4 button remote control (transmitter)).
3. Latched/Inter-Lock: Press->on; Press other button->OffPress one button for one time, the corresponding channel is working/on;
Press another button is stop/OFF（At the same time, another corresponding channel works） .
( 4 channel switch( receiver) need 4 buttons remote control (transmitter).
The setting of working mode：
1. Momentary Mode: pressing one time the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting momentary mode successfully .
2. Toggle Mode: pressing two times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting toggle mode successfully .
3. Latched Mode: pressing three times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press first remote button ,follow on second remote button , signaling three times by remote’s LED indicator informs about setting latching mode successfully ( first button stands for on , second button stands for off ).
4. 2CH momentary + 2CH Toggle:pressing four times the learning key button on the receiver board(Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
5. 2CH Momentary + 2CH Latched : pressing five times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
6. 2CH Toggle + 2CH Latched : pressing six times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
7. 2CH Latching + 2CH Latched :pressing seven times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
8. Deleting existing remote controls data: pressing eight times the learning key button on the receiver board , the LED indicator on receiver board will flash for eight times , the existing remote controls are deleted successfully.
NOTES:1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient, (when the battery voltage is insufficient, generally get close transmitting )
3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wireless RF products,and avoid too short distance between the remote control and receiver board .
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe .
What's More: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
/ae01.alicdn.com/kf/H97d4f6d617c94855acd366d013c2d512K.jpg>
/ae01.alicdn.com/kf/Ha7d60e212aad4db8ad41961cc45f97f8t.jpg>
/ae01.alicdn.com/kf/H34ae2c55d67d486aa9a9cb32403018fdE.jpg>
/ae01.alicdn.com/kf/H83db4c0ec7844cbca25f6328863ae6d3T.jpg>
/ae01.alicdn.com/kf/H25161c4f446042f8ba32a5b4fd7758a8q.jpg>
Specifications
Key Features
Support APP : NoFrequency : 433 MHzChannel : 4Package : NoModel Number : 433Mhz Wireless Remote Control Switch DC 12V 4CH relay Receiver ModuleWireless Communication : RFUse : TV,Air Conditioner,Universal,Projectors,Audio / Video Players,Camera / Video Camera,Speaker,Lighting,Electric Door,Automated curtains,SWITCHBrand Name : FunDealOrigin : Mainland ChinaSwitch Type : 433mhz Remote ControlEning type : Intelligent Learning eQuiescent Current : 5mAReceiving Sensitivity : >97dbmModulation Mode : ASKWorking temperature : -30~+80℃Shell : YesPCB dimension : 68.2x48.2 (mm)RF working mode : superheterodyneOutput Terminal : NO,COM,NC
433 MHz Universal Wireless Remote Control Switch DC 12V 4 Gang RF Relay Receiver and Transmitter for Garage/LED/Home DIY Control
Technical Data:1. Working Voltage:DC12V
2. Quiescent Current:5mA
3. Working Frequency:433Mhz
4. Receiving Sensitivity:-104dBm
5. Function option:Momentary/Toggle/Latched
6. Modulation Mode:ASK
7. Matching Mode: Intelligent Learning e
8. Output Mode:Dry contact /Voltage output
9. Shell:Yes
10. Working temperature : -30~+80
11. PCB dimension :73x53(mm).
+V — Positive pole input
GND — Negative pole input
1 —KC1 Normal Closed of relay (NC)
2 —KC1 Common of relay (COM)
3 —KC1 Normal Open of relay (NO)
4 —KC3 Normal Closed of relay (NC)
5 —KC3 Common of relay (COM)
6 —KC3 Normal Open of relay (NO)
7 —KC2 Normal Closed of relay (NC)
8 —KC2 Common of relay (COM)
9 —KC2 Normal Open of relay (NO)
10 —KC4 Normal Closed of relay (NC)
11 —KC4 Common of relay (COM)
12 —KC4 Normal Open of relay (NO)
When the relay is energized, NO and COM connected.
Specifications Of The Remote Control: Operating frequency: 433.92MHz
Power by 3V Coin Cell Button Battery (Battery included ),
Material: PVC.
Button: 4 buttons
Size: 55mm x 30mm
Operating voltage: 3V
Operating Current: 12mA
Transmitting power: 10mw
Modulation mode: ASK (AM).
Ening type: Learning.
Transfers distance: 80m.
APPLICATION
Notice: Different options include different packages:
Package 1 Included: Only 1 EV1527 Learning e Remote Control * 1pcs ;
Package 2 Included: (Only 1 receiver) Receiver module (KR1204 ) *1pcs ( include Shell );
Package 3 Included:1 * Receiver module (KR1204) ( include Shell ),
1 * Remote Control (include battery ).
Free Gift: Cross screwdriver * 1pcs.
Attention Please:Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
About Working mode:
1. Momentary/Jog: Press and hold->on; Release->OffKeep pressing one button , the corresponding channel is working /on;
Loosen your finger is stop/OFF .
(4 channel switch(receiver) need 4 button remote control (transmitter ))
2. Toggle/Self-Lock: Press->on; Press again->OffPress one button for one time , the corresponding channel is working/on;
Press the same button again is stop/OFF .
(4 channel switch(receiver) need 4 button remote control (transmitter)).
3. Latched/Inter-Lock: Press->on; Press other button->OffPress one button for one time, the corresponding channel is working/on;
Press another button is stop/OFF（At the same time, another corresponding channel works） .
( 4 channel switch( receiver) need 4 buttons remote control (transmitter).
The setting of working mode：
1. Momentary Mode: pressing one time the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting momentary mode successfully .
2. Toggle Mode: pressing two times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting toggle mode successfully .
3. Latched Mode: pressing three times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press first remote button ,follow on second remote button , signaling three times by remote’s LED indicator informs about setting latching mode successfully ( first button stands for on , second button stands for off ).
4. 2CH momentary + 2CH Toggle:pressing four times the learning key button on the receiver board(Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
5. 2CH Momentary + 2CH Latched : pressing five times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
6. 2CH Toggle + 2CH Latched : pressing six times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
7. 2CH Latching + 2CH Latched :pressing seven times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
8. Deleting existing remote controls data: pressing eight times the learning key button on the receiver board , the LED indicator on receiver board will flash for eight times , the existing remote controls are deleted successfully.
NOTES:1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient, (when the battery voltage is insufficient, generally get close transmitting )
3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wireless RF products,and avoid too short distance between the remote control and receiver board .
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe .
What's More: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
433 MHz Universal Wireless Remote Control Switch DC 12V 4 Gang RF Relay Receiver and Transmitter for Garage/LED/Home DIY Control
Technical Data:1. Working Voltage:DC12V
2. Quiescent Current:5mA
3. Working Frequency:433Mhz
4. Receiving Sensitivity:-104dBm
5. Function option:Momentary/Toggle/Latched
6. Modulation Mode:ASK
7. Matching Mode: Intelligent Learning e
8. Output Mode:Dry contact /Voltage output
9. Shell:Yes
10. Working temperature : -30~+80
11. PCB dimension :73x53(mm).
+V — Positive pole input
GND — Negative pole input
1 —KC1 Normal Closed of relay (NC)
2 —KC1 Common of relay (COM)
3 —KC1 Normal Open of relay (NO)
4 —KC3 Normal Closed of relay (NC)
5 —KC3 Common of relay (COM)
6 —KC3 Normal Open of relay (NO)
7 —KC2 Normal Closed of relay (NC)
8 —KC2 Common of relay (COM)
9 —KC2 Normal Open of relay (NO)
10 —KC4 Normal Closed of relay (NC)
11 —KC4 Common of relay (COM)
12 —KC4 Normal Open of relay (NO)
When the relay is energized, NO and COM connected.
Specifications Of The Remote Control: Operating frequency: 433.92MHz
Power by 3V Coin Cell Button Battery (Battery included ),
Material: PVC.
Button: 4 buttons
Size: 55mm x 30mm
Operating voltage: 3V
Operating Current: 12mA
Transmitting power: 10mw
Modulation mode: ASK (AM).
Ening type: Learning.
Transfers distance: 80m.
APPLICATION
Notice: Different options include different packages:
Package 1 Included: Only 1 EV1527 Learning e Remote Control * 1pcs ;
Package 2 Included: (Only 1 receiver) Receiver module (KR1204 ) *1pcs ( include Shell );
Package 3 Included:1 * Receiver module (KR1204) ( include Shell ),
1 * Remote Control (include battery ).
Free Gift: Cross screwdriver * 1pcs.
Attention Please:Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
About Working mode:
1. Momentary/Jog: Press and hold->on; Release->OffKeep pressing one button , the corresponding channel is working /on;
Loosen your finger is stop/OFF .
(4 channel switch(receiver) need 4 button remote control (transmitter ))
2. Toggle/Self-Lock: Press->on; Press again->OffPress one button for one time , the corresponding channel is working/on;
Press the same button again is stop/OFF .
(4 channel switch(receiver) need 4 button remote control (transmitter)).
3. Latched/Inter-Lock: Press->on; Press other button->OffPress one button for one time, the corresponding channel is working/on;
Press another button is stop/OFF（At the same time, another corresponding channel works） .
( 4 channel switch( receiver) need 4 buttons remote control (transmitter).
The setting of working mode：
1. Momentary Mode: pressing one time the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting momentary mode successfully .
2. Toggle Mode: pressing two times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting toggle mode successfully .
3. Latched Mode: pressing three times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press first remote button ,follow on second remote button , signaling three times by remote’s LED indicator informs about setting latching mode successfully ( first button stands for on , second button stands for off ).
4. 2CH momentary + 2CH Toggle:pressing four times the learning key button on the receiver board(Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
5. 2CH Momentary + 2CH Latched : pressing five times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
6. 2CH Toggle + 2CH Latched : pressing six times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
7. 2CH Latching + 2CH Latched :pressing seven times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully .
8. Deleting existing remote controls data: pressing eight times the learning key button on the receiver board , the LED indicator on receiver board will flash for eight times , the existing remote controls are deleted successfully.
NOTES:1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient, (when the battery voltage is insufficient, generally get close transmitting )
3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wireless RF products,and avoid too short distance between the remote control and receiver board .
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe .
What's More: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
What’s in the box
1x packages
Specifications
- SKU: GE779IP40USU3NAFAMZ
- Model: SM-ZDDHTJ-9-21-1967
- Production Country: China
- Size (L x W x H cm): 20x10x20
- Weight (kg): 0.4
- Color: 1 Receiver Only
- Main Material: other
Verified Customer Feedback
This product has no ratings yet.
/product/43/3017552/1.jpg?4123)
433 MHz Universal Wireless Remote Control Switch DC 12V 4 Gang RF Relay Receiver and Transmitter for Garage/LED/Home DIY Control
GH₵ 578.00
GH₵ 809.2029%
Questions about this product?