42 Two-phase Stepper Motor with Driver Board Kit 4-lead 1.5A

Features:

1. DIP Switch Setting: Using DIP switch setting subdivision accuracy, positive and negative directions, bus control output driver status and control signals, adjustable feedback loop.

2. Closed Loop Control: Closed loop control technology fundamentally solves the problem of motor step loss, and can better control the position accurately.

3. Integrated Design: The motor and driver are combined into one, and the wiring is simpler and clearer.

4. Coil: The coil is made of copper enameled wire, and the internal copper wire is evenly arranged to reduce heat generation.

5. Application Examples:

(1) 3D printing with fine closed-loop positioning.

(2) Optical precision aiming ( telescope, camera gimbal, etc. )

(3) Record player.

(4) Force feedback / impedance control robot.

(5) Force feedback of game controller.

(6) Adjustable mechanical impedance: virtual spring, damper, etc.

(7) Electric transmission device between two axes such as CNC machine tools.

(8) Gravity elimination ( eg: offset gravity torque on the robot arm, etc. )

Note:

1. Due to manual measurement, the size may be slightly different. Thank you for your understanding.

2. Due to different light conditions and different monitors, color displayed in photos may be showing slightly different from real object.

3. The product is installed and tested by professionals, and it can be used normally after receiving it.

Specifications:

Color: Black amp; Silver

Material: Aluminum Alloy + Electronic Components

Motor Parameter:

Step Angle: 1.8 deg;

Rated Voltage: 3.6V

Rated Current: 1.5A/phase

Holding Torque: ge;420 mN.m

Positioning Torque: 15 mN.m REF

Maximum No-load Starting Frequency: ge;1400 PPS

Maximum No-load Operating Frequency: ge;4000 PPS

Phase Inductance: 3.7x (1+20%) mH

Phase Resistance: 2.4x (1+15%) Omega;/phase

Electrical Strength: AC 600V/1mA/1S

Wiring Instructions:

VCC: Connect 12-30V power supply ( Refer to the working voltage of the motor, general 24V )

GND: Ground wire

CLK: Control signal ( Connected to pulse input )

DIR: Direction control signal ( Floating forward, ground reverse )

ENA: Connect to enable signal ( Default enable, grounding stops working )

COM: Connect to 3.3V common anode

Size: 4.1*4.1*4cm / 1.61*1.61*1.57in

Packing Size: 12.7*8*7.8cm / 5.04*3.15*3.07in

Net Weight: 279g / 9.84oz

Gross Weight: 345g / 12.17oz

DIP Switch Setting ( ON = 1, OFF = 0 )

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.