340m 1.75mm 3D Printer PLA Filament For Drawing Printer TPU RepRap 1.3kg/2.9lb Transparent

Feature:
-100% new and high quality.
-Pure PLA, no impurities, bright , high toughness.
-Consumables in the use of the material is very uniform, not easy to plug.
-The large part model can be printed without a heated bed and the corners do not tilt, with good tensile strength and ductility.
-Has good mobility and transparency, low shrinkage, smooth and delicate.
-With a lower solution strength, the print model is more plastisable.
-Widely used in industrial machinery and plastic parts, model machinery, electronic appliances, instrumentation and industrial fields.

-Instructions for use:
-Printer extrusion head temperature control in the 190-230 degrees Celsius, the board without heating, the line at 50 degrees Celsius dry after 2-4 hours to use, forming better, smooth and delicate silk.

Specifications:
Product name: Printer Filament
Material: PLA
: White, Blue, Red, Transparent
Size: Approx. 20x6.5cm/7.87"x2.55"
Wire diameter: 1.75mm
Print temperature: 195-1230°
Density: 1.25 ± 0.05 g / cm3
Length: 340m
Print speed: 40-100mm / s
Bending modulus: ≥ 60Mpa
Tensile strength: ≥ 60Mpa
Breaking elongation: ≥3%
Solution flow rate: 5-7 g / 10 min (190 ° , 2.16 kg)
Weight: 1321g

Package Include:
1x 3D Printer Filament




























a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a