300M Rechargeable 100 Level Shock Vibra Remote LCD Pet Dog Training Collar

Specifications:

1.Condition:

2.Model:998DR

3. : Black

4. LCD Display

5. Remote range up to 300 Meters





Features:

1. Effective on dogs : 10 to 130 pounds

2. The system can be used for 1 or 2 receivers.

3. 100 levels of ion & static(levels can be altered by use of up & down on.)

4. The Collar length can be adjustable from 12" to 21"

5. The Remote Transmitter & the Collar Receiver can be Rechargeable and waterproof.





NOTE:

1. If you hear noise from the collar when you shock it, it is normal as it comes from the charging beads inside.

2. Presently, this product is the most effective and safest tool for training pet. Following the operational instructions, you can effectively train the pet and bring it no harm.

3. Prepare the Remote Transmitter:

4. Charge the Remote Transmitter:





Prepare the Collar Receiver:

1). Connect the charger connector to the charging jack.

2). Plug the charger into a standard outlet.

3). The red light on the Transmitter will be lighted.

4). Charge the Transmitter at least 6 hours for the first charger.

5). After fully charged, the red led will be turned off automatically.

6). Low battery Indicator(the symbol) :Q will show up on the right down side of LCD screen.





How to Use the Transmitter:

1). To turn on/off the Transmitter, hold the Transmitter for 5 seconds.

2). Set to the different modes by pressing the Mode on----the LCD images will change.

3). Press the up and down ons on right hand side to set level.

4). Choose the different channels for 1 or 2 receivers.

5). The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.

6). In STANDBY MODE, press any on (except LED light on) to wake it up.





Charge the Collar Receiver:

1). Connect the charger connector to the charging jack.

2). Plug the charger into a standard outlet.

3). The red LED light inside the Collar Receiver will be lighted.

4). Charge the Collar Receiver at least 6 hours for the first charge.

5). After fully charged, the red LED light will be turned off automatically.

6). When charging is completed, put the rubber cover in the right position to keep the internal unit from dust and water.

7). Low battery Indicator: the Collar Receiver will keep beeping for 2 minuets unless It gets charged.







Connect the Transmitter with the Collar Receiver:

1). Turn on the Transmitter and choose 1 or 2 channels to encode.

2). Lift the Reset part of the Rubber cover in the Collar Receiver.

3). Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.

4). Press the LAUNCH on on the Transmitter immediately while you are hearing a beep from the collar.

5). The Collar Receiver will beep , it means that the Transmitter has encoded the collar.

6). After completion, put the rubber cover in the right position to keep the internal unit from dust and water.
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a