915 Generation 3.3V-5V IR Infrared Flame Sensor 4 Pin Infrared

The following is the detailed introduction about our products:


About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
66409. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !Usage:Apply for Various flames, fire source detection. The module can detect flame or light source with wavelength in the range of 760 nm to 1100 nm. The flame distance of the is 80 cm. The larger the flame, the farther the test distance is.Used for fire al, etc
The detection angle of the module is about 60 degrees, which is particulay sensitive to the flame spectrum with adjustable precision potentiometer to adjust sensitivity(blue digital potentiometer adjustment in the figure)
The comparator output, the signal is clean, the waveform is good, the driving ability is strong, more than 15mA
Working voltage 3.3V-5V. Output form: DO digital switch output (0 and 1) and AO analog voltage output.Use wide voltage LM393 comparator
Note:Keep the sensor and flame at a certain distance to avoid high temperature damage to the sensor.The small board output interface can be directly connected to the IO port of the microcontroller.Small board analog output mode and AD conversion processing for higher precision
colour:Black + blue
Material:Plastic + metal
size:3.2*1.4cm
Package Contents:
10 * IR Flame Detection Sensor Modules
Module instructions:
1. The flame sensor is most sensitive to flame and is also reactive to ordinary light. It is generally used for flame al and other purposes.
2, the small board output interface can be directly connected to the IO port of the microcontroller
3. The sensor and the flame should be kept at a certain distance to avoid damage to the sensor at high
temperature. The flame distance of the is 80cm. The larger the flame, the farther the test distance is.
4, small board analog output mode and AD conversion processing, can achieve higher precision
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.