220V Auto Infrared Body Motion Sensor PIR Sensing Switch Microwave Radar Sensor

Specification：

Working Voltage: AC 220V 50Hz

Load : lamp 100W CFL 32W

Sensing range: 180x360

Sensing range: 8m

Size：50x36x25mm

Install cable length: 16cm

Ambient temperature: -20 ℃ ~ + 50 ℃

Their consumption: 0.2W

Delay time: 30 seconds

Sensitivity: 7LUX

speed: 0.6-1.5 m / sec



Feature：

Radar switch sensing distance far enough, wide angle, no dead zone, can penetrate glass, and thin wood, depending on the and can penetrate walls of different thicknesses, from the environment, temperature, dust and effects, in the case of more than 37 degrees , the sensing range is not shortened, the temperature sensing distance becomes constant. I hope sensing angle a small point, you can set the switch sides of the metal obstruction, or choose our restaurant infrared body sensor switch. Radar can pass through walls of 25cm hollow home.



1. Smart sensor: When someone enters the range of the product, the microwave detector operating point lights when people leave the range, the light automatically goes off. It can automatically identify day and night.

2. Smart delay: switch after detecting the human body every activity will be automatically extended cycle, and extended time of the last human activities as the starting point.

3. Work: After induction switch is turned on, the delay period, if human activity, the switch will continue on until people leave and extended time.

The photosensitive control: according to the outside light intensity, to control the switch is working to achieve energy savings.

4. Delay: after people left,delay 30 seconds off.



Use: hallway, corridor, basement, garage, storage, monitoring and indoor (outside) energy-saving automatic lighting situations



Note：

1. Disable charged install and operate, load short circuit is strictly prohibited. (Be sure to regulate their own before the switch, or peril)

2. Do not exceed the load usage.

3. When the wall thickness of less than 10 cm, the switch is likely to partition induction.

4. In the sensitive area, do not affect its non-stop movement of an object or obstacle .

5.When install, metal objects blocking the sensor is prohibited.

























a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a