2017 Q50 Smart Kid Safe Smart Watch SOS Call Location Finder Locator Tracker For Child Anti Lost Monitor Baby Wristwatch Gifts Black HT

Feature: Touch screen: NO
Storage: 128KB
Camera: NO
Microphone: YES
Call: YES
OS: Android/iOS
Operation mode: Button
Processor: 6261 364mhz
Network: GSM,GPRS(Network Position not support GPS)
Cellular Band:GSM 850/900/1800/1900MHz
GSM positional accuracy: 50-200m SIM card: YES
Speed accuracty: 0.1m/s
Battery: 3.7V 400mAh Li battery(inclueded)
USB interface: USB2.0
Standby time: 2-3 days
Screen size: Approx.3*2.2cm
Dial plate size: Approx.5.3*3.3*1.3cm
Color: Black/Deep blue/blue/pink/green
Material: Silicone Screen: LED
Suitable for: Kids Package:
1x Smart watch
1x Screwdriver
1x USB cable
1x User manual I. Preparation Before Use 1. Check whether the device鈥檚 model is correct or not, whether the accessories are all received. 2. Prepare a SIM card that supports GSM network; for the network, please consult your local operator. (Please turn off the device before insert your SIM card) Support network: 2G, band: 850/900/180/1900mhz 3. The SIM card for the device needs to open GPRS function and caller ID function. II. Detailed Operation 1. Insert the SIM card, turn the device on, then there will be 鈥淓鈥?-- 2G network logo. Or it will show 鈥渘o SIM card鈥? (If you can鈥檛 turn the device on, please charge it for half an hour and try it again) 2. Scan the QR code in the manual to get the APP. There are QR codes for the Android and the iOS mobile phones.
3. Registration: Scan the 15-bit registration code or manually enter the registration code; the device is not IMEI. If the tag of registration code is lost, you can text 鈥減w,123456,ts#鈥?to the device鈥檚 SIM card. Your phone will receive a message in terms of the registration code, that is ID. Then follow the operating steps to register. (Note: Please select the correct country or region when you register.) 4. Log In: After finishing your registration, enter the correct account and password in the login window, click 鈥渓og in鈥? enter the home page to achieve the operation of the device. III. Common Questions. 1. It prompts that it鈥檚 unable to register. A: There are two general situations: a. The device鈥檚 number does not exist or the number has been registered, please contact us (the seller) about it at once.
B. The account has been registered, that is, you just need to change another account that can be registered. 2. The device is unable to charge or you can not turn it on. A: The device has less than 100% power after it leaves the factory. During the long-term transport, it may lose lots of power for the environment is always changing, which causes that it is unable to turn on when you receive it. At this case, connect the data cable with a 5V adapter, charge the device for about ten minutes, then it will prompt it is charging. 3. APP is downloaded, but the device can not connect with the phone. The App fails to send any command, prompting that the device has not connected network yet. Or the App map does not update the current position and time of the watch, and it also fails to send the position. A: Because the device鈥檚 connection is unsuccessful, which caused by the following three situations: (1) Check whether the watch鈥檚 GSM signal is normal or not, whether there the 鈥淓鈥?is. (2) Check whether the mobile phone鈥檚 network signal is good or not. (3) Check whether the device鈥檚 SIM card support 2G network; the device only supports 2G network. 4. The device fails to power off: it is required to take out the card and then long press the power button. A: Because the device is inserted the SIM card, you can not long press the button to shut it down. This design is to prevent the child shut it down by himself or in case that bad guys are easily to shut it down. So After the SIM card inserted, you have to use APP to remotely shut it down. 5. the product can not be connected to WiFi, you need to install the SIM card, and then via the mobile phone APP positioning, some customers think that it can connect to WiFi directly. A: Wifi is aimed at more precise positioning. And the watch can not be connected to wifi. Generally indoor GPS signal will not be quite good, wifi have a fixed physical address, so the indoor GPS signal is not that good, wif Positioning will be automatically searching for nearby wifi, improving positioning accuracy. 6. Some buyers installed a SIM card, but still cannot search the network, do not know SIM card compatibility. This product supports network standard: 2G/GSM, 850/900/1800/1900mhz. SIM card compatibility: Only support 2G flow, the watch cannot be used if have no 2G network. You can consult the network operator to check the network condition.(Australia and Singapore do not support 2G flow)