Fashion 2.4GHz 5GHz Wireless HDMI Transmitter Receiver

Product introduction
The HDMI transmitter uses standard Ethernet TCP / IP protocol to transmit high-definition audio and video signals through wireless WIFI signals, enabling point-to-point applications and many-to-one applications. The device has excellent image processing and transmission capabilities, making signal transmission more smooth and stable, and is a cost-effective way to wirelessly extend HDMI signals.

Features
1. Transmission of HDMI video and audio signals via built-in wireless WIFI
2. The open environment is transported up to 20 meters, and the partition wall is transmitted up to 10 meters.
3. High-definition video signal resolution up to 1920 * 1080P @ 60Hz
4. Compatible with HDMI 1.3
5. Support WIFI automatic link
6. Use international standard H.264 format to compress and decompress video, effectively improve transmission efficiency and ensure smooth playback.
7. Compliant with HDCP 1.2 standard - High bandwidth digital content protection technology
8. Can automatically identify and configure various display modes
9. Built-in automatic equalization system, the picture is smooth, clear and stable
10. Built-in ESD electrostatic protection circuit to protect system safety
11. Easy to install, plug and play, no need to set

Product parameters
1. Support Agreement: HDMI1.3, HCP1.2
2. Compression format: H.264
3. Pixel bandwidth: 65MHz, all digital
4. Interface bandwidth: total bandwidth 6.75GBbps
5. Maximum support resolution: 1920X1080P 60HZ
6. Interface: HDMI-A interface
7. Impedance: 100 ohm
8.WIFI RF power: 13dbm
9. Wireless standard: 802.11AC
10. Signal direction: one direction
11. Wireless frequency: 2.4GHz/5GHz
12. Working temperature: 5 Degree Cﾡﾫ+70 Degree C
13. Storage temperature: -20 Degree C~+60 Degree C
14. Working humidity: 10ﾡﾫ90% RH (no condensation)
15. Storage humidity: 5 ~ 95% RH (no condensation)
16. Maximum power consumption: 9W

Connection and operation:
1. Connect the HDMI source to the HDMI wireless transmitter
2. Connect the HDMI wireless transmitter receiver to a display device (such as a high-definition TV, splicing screen, etc.)
3. Connect the transmitter and receiver to the power supply. When the indicator light is normal, the system will branch normally.
4. Adjust the WIFI of the transmitting end and the receiving end to the same frequency band. It is recommended to adjust the 53 frequency band, and the STA and other flashing communication are normal.