2.4G5G Wireless WiFi AP Router 1200Mbps with 2X5DBi

Super cost-effective hardware configuration: Built-in MT7628AN main control chip, industrial-grade circuit design, 8MB Flash/64MB SDRAM, supports IEEE802.11b/g protocol, can 300Mbps wireless access speed, anti-high and low temperature design, guarantees network data can be used in extreme environments Real-time, long-term, stable, transmission, enhance experience.
100M adaptive wired network interface, supporting PoE and DC power supply: Provides LAN1/WAN PoE+LAN2 10/100Mbps adaptive wired network interface, supports 24VPoE remote power supply, 12V/1A local DC power supply, flexible power supply mode, suitable for wireless engineering scenarios where power supply is inconvenient, and reduces construction costs.
Energy efficient: Based on the IEEE802.3az standard hardware design, when is using , the device will automatically enter the low-power and power-saving mode. a accesses , it will quickly and automatically switch to the normal mode, and the entire energy-saving process will not be affected. It is carried out under the premise of use, which can effectively reduce power consumption by 30%, and save a lot of wireless network operating costs.
Stylish and , easy and flexible installation: The appearance is stylish and elegant, and it supports wall-mounted/pole-mounted installation, flexible installation, and greatly reduces construction difficulty and improves construction efficiency without affecting the design.
IP65 dustproof and waterproof, suitable for harsh environments: The shell has IP65 outdoor dustproof, waterproof, and sunscreen capabilities. It can work normally in extreme environments as low as -30°C and as high as 55°C. It can adapt to harsh outdoor environments and stable network operation for 24 hours

Model: N595
Main chip: MT7628AN 300Mbps + MT7613BEN 867Mbps high-performance enterprise-level chip
Main frequency: 550MHz
Wireless technology: 2.4G:300M 802.11b/g MIMO technology
5G:867M 802.11a/ac MIMO technology
Memory: 64MB DDR2 RAM
Flash: 8MB
Network interface: LAN1/WAN PoE+LAN2 10/100Mbps adaptive RJ45 interface
Button: 1*Reset Long press to restart within 3 seconds, factory settings after more than 6 seconds
Power consumption: Less than 10W
Power supply: POE: 24V 0.5A, DC: 12V 1A
Working mode: AP mode (no need to set up, plug and play), routing mode, MESH mode
Maximum support: 64 users
Status System status, wireless status, real-time
Network configuration: DHCP/Static IP/PPPoE
Wireless configuration: wireless switch, SSID, encryption , wireless password, wireless multimedia, terminal isolation, wireless
Plug Type :EU Plug,it applies to Indonesia, , , , Italy and so on.
Colour:White
Material:plastic
Voltage: AC100-240V

Package Contents:
1 x Router
1 Adapter

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.