16 in1 Watch Repair Tool Set Cloth Packaging

16 in1 Watch Repair Tool Set

1. Material: cloth bag, plastic, alloy
2. Scope of application: household, watch repair
3. Purpose of prying knife: a tool often used for press-in type watch back cover
4. Remove the strap: When removing it, be sure to align it, otherwise the needle will be damaged! (Please don’t blame the tool for misalignment) The needle is made of iron, with a thickness of 1 mm. If it is a better steel strap, the needle will break if you use this tool.
5. The purpose of the raw ear batch: dedicated to remove the raw ears between the watch case and the strap, or the raw ears of the belt
6. The purpose of the red pliers: pliers are inevitably used to assemble and disassemble the watch, such as clamps, pins, etc. in the disassembly watchband
7. Folding watch strap plastic seat use: when disassembling the watch chain, clamp the watch chain on the plastic seat shelf, which is very convenient to install or remove the watch strap
8. Screwdriver use: used for internal assembly and disassembly of the machine, the size of the screwdriver in this set of tools is 1.5-2 mm
9. Rubber hammer use: used to knock hairpins etc. when the strap is removed and then installed
10. Needle-nose tweezers use: used to clamp some accessories and other small parts, etc.
11. Cloth bag size: 21x10x4.5 cm
12. Weight: 320 grams
Tips:
1. Not all watch straps can be removed, please pay attention! The three steel strips of this set are 0.8/0.9/1.0 mm thick, which is suitable for some steel strip holes.
2. Not all screw caps in the set can be opened with two claws, only part of the screw cap can be opened, please note that the steel teeth of the two claws have a diameter of 2.1 mm, that is to say the diameter of your bayonet It must be larger than 2.1 mm to be used, and the back cover of the watch with a diameter of 37 mm or less can be opened, subject to the bayonet on the cover!
3. The size of the Phillips screwdriver in the set is 2.4 mm diameter suitable for pa