12V Car Immobilizer Engine LoFuse Relay Isolator System Anti-theft Device Wireless Vehicles Motorcycle Accessories

Features:A new type of car immoblizer system. The main unit is smaller, the e control is and thinCircuit lomode: Receive a signal within 16 seconds to start the vehicle. Engine shuts off if no signal is received within 16 seconds.Anti-robbery mode: Receive a signal to start the engine. Engine shuts off after 30 seconds of no signal.Easy to install, directly unplug the oil circuit fuse in the engine compartment of the car, and plug our main unit directly into the repment to complete the installation.Preventing thieves from stealing cars, provides a safe guarantee for your car.Suitable for 12V oline vehicles/motorcycles.How to install:First open the fuse box, find the oil fuse and pull it out, then rep it with the red wire plug , Keep the fuse in a safe p , fix the main unit with a tie and cover the fuse box.Specification:Unit working voltage: 12V±3VUnit quiescent current: ≤12mAUnit control current: ≤30Ae control operating current: ≤3~8mAe control standby current: ≤1uAe control battery specification: CR2032e control frequency: 433.92MHzInstallation location: oil fuseMain function: cut off the oil and turn off the engineNotice:Electric cars, electric motorcycles, electric tricycles and Electric vehicles are not suitable.When not using the system ,turn the e off for extends battery life ,This product is not waterproof design.Package list:(1 set)1 x Unit with wire (fuse=15A)2 x r Remomte1 x User manual in English

M506 immobilizer system

CHADWICar ligent anti-robbery system

12Voltage Universal ligent oil circuit loor anti-theft device,Non-destructive installation DIY easy

Applicable models: 12V oline car/12V motorcycle

Installation location: oil fuse (directly rep the car fuse)

Product function: cut off the oil and turn off the engine

Product features: fast installation, non-destructive plug-in, stable performance

This is a new type of car immoblizer system. Compared with other similar products on the market, it has a relatively new design. The main unit is smaller, the e control is and thin, and the new micro-electric technology brings you more safety and installation is very simple, you can DIY, directly unplug the oil circuit fuse in the engine compartment of the car, and plug our main unit directly into the repment to complete the installation. Just fix it and cover the engine cover and you can use it. The e control comes with Auto-sensing function, no need to operate, you can hide the e control in your wallet or other ps, no one will notice, even your closest friends don't know that you have installed new products in technology, you can refuse gracefully borrowing cars from others, or preventing thieves from stealing cars, provides a safe guarantee for your car.

Features:

1. Circuit lomode (no short-circuit ring is inserted in the unit inside) factory default mode

1. If the car does not receive the signal from the e control within 16 seconds after starting the car, the

engine will turn off. The car can start normally if it receives the signal from the e control within 16

seconds of starting. Even if it no longer receives the signal from the e control, it will not turn off.

2. e control operation:

(1) Manual mode: pre the e control every time or immediately after start-up.

(2) Automatic mode: Just bring the e control.

3. LED indication function: When receiving a e control signal, the LED fes once, indicating that the

signal is normal, and no signal will not f.

2. Anti-robbery mode: (the host inserts a short-circuit ring)

1. When the host receives the signal from the e control, the car can start normally, and it needs to continue

to receive the signal from the e control in the middle, otherwise it will turn off after 30 seconds if the

signal is not received.

2. LED indication: when the signal from the e control is received, it fes once for 1 second, when the

signal is not received, it fes 2 times per second for 11 to 20 seconds; when the signal is not received for

21 to 30 seconds, the LED fes 4 times per second. (After 30 seconds Have not received the signal LED doe

not light)

3. The e control in anti-robbery mode must turn on the automatic mode, otherwise it will turn off halfway

due to no signal received.

3. How to use the e control:

Please keep the e control alone, do not mix with the car keys to increase the diffity of grabbing.

learning: Pre the host computer learning code switch to let go, immediately pre the e control

on, the relay in the host will beep 3 times to indicate that the code learning is succeful, and the method

for learning the second e control is the same as above. Up to 2 can be learned. The code ha

been learned well when leaving the factory, and there is no need to repeat the operation.

4. How to install:

First open the fuse box, find the oil fuse and pull it out, then rep it with the red wire plug , Keep the

fuse in a safe p , fix the main unit with a tie and cover the fuse box.

NOTICE:

When not using the system ,turn the e off for extends battery life ,This product is not waterproof design.